8 Ağustos 2010 Pazar

Dynamic Programming with Field Symbols and References

Lesson Overview
The syntax supporting dynamic programming with ABAP has been expanded
continuously from release to release – starting with ABAP/4. Our intention here is
not to trace this development; we will systematically introduce the entire scope.
Nonetheless, knowing about the history may help you understand why similar
concepts are sometimes implemented using widely differing syntax structures.
Since SAP Web AS 6.10 at the latest, ABAP offers at least the same options that
you may know from other programming languages. In contrast to these other
languages, ABAP can also rely on support by the ABAP Workbench, even in the
area of dynamic programming.
Lesson Objectives
After completing this lesson, you will be able to:
• Create objects dynamically
• Access class components and object components dynamically
• Define field symbols
• Define data references
• Dereference data references
• Generate data objects dynamically

Field Symbols
ABAP has featured field symbols as dereferenced pointers for some time now.
Field symbols allow you “symbolic” access to an existing data object. All
accesses that you make to the field symbol are made to the data object assigned
to it. Therefore, you can access only the content of the data object to which the
field symbol points. This technique is referred to as the “value semantics of field
symbols”.
You declare field symbols using the FIELD-SYMBOLS statement.


Caution: Note that the angle brackets (<>) in the field symbol name

are part of the syntax.

You use the ASSIGN statement to assign a data object to the field symbol. If the

field symbol is not typed (TYPE ANY), it adopts the type of the data object.

By specifying a type for the field symbol, you can ensure that only compatible

objects are assigned to it.

Example:

DATA: date TYPE d VALUE ’20040101’, time TYPE t.

FIELD-SYMBOLS: TYPE d, TYPE t.

ASSIGN: date TO , time TO .

* possible?

= .

The last statement represents a syntax error! Conversely, using the following

construction would trigger a runtime error:

FIELD-SYMBOLS: TYPE ANY, TYPE ANY.
You can use IS ASSIGNED to check whether a data object has been assigned to


a given field symbol. The UNASSIGN statement sets the field symbol to “point

to nothing”. Accordingly, the logical expression IS ASSIGNED is false after

this statement.

If you use the CASTING addition when you assign a data object to a field symbol


that has a different type, you can remove the restrictions of having to use the data

object’s original type. The data object is then interpreted as though it had the

data type of the field symbol.

If you use the CASTING TYPE addition when you assign a data object to a field

symbol that has a different type, you can access the data object using the field

symbol as if the object had that explicitly specified type.

In the above example, note that the system field sy-datum is an elementary

character-type component of length 8.

You can also use type casting dynamically when you assign a data object to a

field symbol.

Example of Dynamic Type Casting:

PARAMETERS tabname TYPE dd02l-tabname.

DATA: line(65535) TYPE c.

FIELD-SYMBOLS TYPE ANY.

ASSIGN line TO CASTING TYPE (tabname).
You can now use to access line as if this elementary data object had


the same type as the line type of the transparent table passed using tabname.

Note: This simple example will only work in Unicode systems if

tabname defines a character-like structure.

Accessing Attributes with Field Symbols

Field symbols can be used to access both static attributes and instance attributes,

by assigning their contents to the field symbols. In the syntax you replace the

data object by access to the attribute.

Attribute Access with ASSIGN Statement

ASSIGN class=>static_attribute TO .

ASSIGN o_ref->instance_attribute TO .

If field symbol is typed generically, any missing type characteristics will be

copied from the attributes during assignment.

This access can also be performed dynamically:

Dynamic Attribute Access with ASSIGN

Statement

DATA:

classname TYPE seoclsname VALUE ’CLASS’,

attributname TYPE seocpdname VALUE ’ATTRIBUTE’.

ASSIGN (classname)=>(attributname) TO .

ASSIGN o_ref->(attributname) TO .

Data References

Data references and object references were introduced alongside field symbols as

part of the enhancements in SAP R/3 4.6A. Since this point, ABAP features full

“reference semantics”.

Data reference variables contain data references, or pointers to data objects.


You can use the TYPE REF TO addition for the TYPES statement to define a

reference type for a data object. In this statement, you can either specify a data

type specifically or use TYPE REF TO data to choose the generic variant. In

this case, your data reference can point to any type of data object.

Note: Syntax item data represents a predefined identifier, comparable

to space and constructor.

The corresponding DATA statement defines the data reference variable itself.

Reference variables are data objects that can contain the address of any data object

(TYPE REF TO data) or a data object of the specified type.

Data references involve using reference semantics – that is, when a data reference

variable is accessed, the data reference itself is addressed, which means any

changes affect the addresses.

Data reference variables are handled in ABAP like other data objects with an

elementary data type. This means a reference variable can be defined not only as a

single field, but also as the smallest indivisible unit of complex data objects such

as structures or internal tables.

After it is defined, a data reference variable is initial - that is, it contains a blank

pointer. For a data reference variable to contain a reference that points to a data

object, the GET REFERENCE OF statement has to be used to retrieve a reference

to an already defined data object.

A data reference variable can also be assigned an existing data reference from


another data reference variable, or a data object can be created dynamically with

the reference. (More about this later.)

Statically typed data references can be dereferenced directly using the

dereferencing operator ->*. This means they directly access the content of the

data object to which the reference points. To ensure compatibility, you have to

dereference generically typed data references (TYPE REF TO data) and

assign them to a field symbol, which you can then use to access the content. (This

method will be demonstrated again later.)

Therefore, the expression data_reference->* might be compared to the

expression .

When data references are involved which are statically typed with a structure

type, you can address the components of the referenced data object directly, using

the component selector ->, and use them in any operand item.

Example:

DATA: wa TYPE sflight,

ref TYPE REF TO sflight.

GET REFERENCE OF wa INTO REF.

ref->fldate = ref->fldate + 5.

WRITE: / ref->seatsmax.

In this case, the component selector corresponds to the hyphen - in a regular

component access of structured data objects.

Validity of References – Logical Expression

... ref IS [NOT] BOUND ...

The ref IS [NOT] BOUND statement queries whether reference variable ref

contains a valid reference. ref has to be a data reference variable or object

reference variable here.

When a data reference is involved, this logical expression is true if it can be

dereferenced; When an object reference is involved, it is true if it points to an

object. The logical expression is always false if ref contains the null reference.

In comparison, the logical expression ... ref IS [NOT] INITIAL ...

merely lets you determine whether or not ref contains the null reference.
Dynamic Instantiation and Cast Assignments for Data


Objects

You can use data references and the CREATE DATA statement to generate data

objects at runtime analogous to class instances:

Instantiation of Data Objects at Runtime

DATA ref TYPE REF TO typename.

CREATE DATA ref.

After this, the ref data reference then points to the created data object. As an

alternative to the static variant, you can also determine the data type at runtime:

Generic Typing of Data Objects at Runtime

DATA ref TYPE REF TO data.

CREATE DATA ref TYPE typename.

To do so, the reference ref has to be typed generically with TYPE REF TO

data. In the following dynamic variant, the type name (typename) can also be

specified using a variable var_type:

Dynamic Instantiation of Data Objects at

Runtime

DATA ref TYPE REF TO data.

DATA var_type TYPE ... .

var_type = ... .

CREATE DATA ref TYPE (var_type).

In order to access the content of a data object that a data reference points to,

the reference has to be dereferenced in the way described above. To ensure

compatibility, however, a field symbol is required for generically typed data

references (TYPE REF TO data):

The ASSIGN ref_itab->* TO statement assigns the data


object which is referenced by reference variable ref_itab to field symbol

. If the assignment is successful, sy-subrc is set to zero.

If the field symbol is typed completely generically, it assumes the data type of the

data object. If the field symbol is typed partially or fully, the system checks the

compatibility of the data types. You can also cast the assigned data object.

If the data reference is initial or invalid, dereferencing is not possible. In this case,

the field symbol is not changed and sy-subrc is set to four.

Generating Data Objects at Runtime –

Example Application

REPORT ... .

DATA:

ref_itab TYPE REF TO data,

ref_wa TYPE REF TO data.

FIELD-SYMBOLS:

TYPE ANY TABLE,

TYPE ANY,

TYPE ANY.

PARAMETERS pa_tab TYPE dd02l-tabname DEFAULT ’SPFLI’.

START-OF-SELECTION.

CREATE DATA ref_itab TYPE STANDARD TABLE OF (pa_tab)
WITH NON-UNIQUE DEFAULT KEY.


ASSIGN ref_itab->* TO .

SELECT * FROM (pa_tab)

INTO TABLE

UP TO 100 ROWS.

CREATE DATA ref_wa LIKE LINE OF . "or: TYPE (pa_tab).

ASSIGN ref_wa->* TO .

LOOP AT INTO .

DO.

ASSIGN COMPONENT sy-index OF STRUCTURE TO .

IF sy-subrc NE 0.

NEW-LINE.

EXIT.

ENDIF.

WRITE .

ENDDO.

ENDLOOP.

The example can display the content of any transparent table. You can make the

FROM clause of the SELECT statement dynamic.

For the INTO clause, you will need a data object that has a line type compatible

with that of the table being displayed. Since the name – and thus the line type –

of the table is not known until runtime, you should not create the data object

until then. Unlike conventional data objects, you can specify the type of a data

object created at runtime dynamically. The TYPE addition of the CREATE DATA

statement contains the name of the table, to ensure that the system always creates

the “appropriate” structure.

The statement ASSIGN ref_wa->* TO assigns the data object to

the field symbol. The data type of the table is inherited by the field symbol so type

casting is no longer necessary. You can now write each data record from the

SELECT statement into the compatibly-typed data object using the field symbol

.

If you knew the component names, you could display the fields directly using

WRITE -.... In most cases, however, you will not normally know

the names of the components, nor how many of them there are. As a result, you

have to use the ASSIGN-COMPONENT variant for output: Each component in

structure is assigned consecutively to field symbol and

then output. When the loop runs out of components, the program requests the

next data record.

Analogous to object references, you can also use the CAST operator to copy data


references to reference variables whose static type is identical to the dynamic

type of the source reference. This is the case in the first example above, but not

in the second.

Note: If the cast assignment operator ?= were not used, these assignments

would not even pass a syntax check, because the source and target types

are incompatible.

If a data reference variable is typed statically, it passes on its type attributes when

it is assigned to a non-typed data reference. This can be very useful, especially

where the additional information of global data types is involved.
During dereferencing, the type of the reference variable, and not the type of the


data object to which the reference “points”, is decisive. This is illustrated in the

following example:
In the above example, reference variable REF_CITYTO is typed statically with a


data element. At runtime, it receives a reference to data object CITYFROM, which

has a different type. The reference is then dereferenced with the generically typed

field symbol , which assumes the type attributes of the reference. As a

result, in a list output, for example, the field documentation for the data element.

Hint: To achieve a consistent result, the REF_CITYTO reference would

have to be typed generically or in agreement with data object CITYFROM.

Caution: This example has been designed specifically to show that the

type of a statically typed reference variable really is decisive.

7 Ağustos 2010 Cumartesi

SAP Certified ABAP Consultant

Uğur Barış TÜRKELİ


Certificate ID : 0007595551
SAP Certified ABAP Consultant

Certified From :

SAP AG GERMANY

Certified Code :

C_TAW12_70

Certified Name :

SAP Certified Development Associate - ABAP with SAP NetWeawer 7.0
 
Abap knowledge:


Abap Dictionary :

 Transparent Tables,Cluster Tables,Pooled Tables,

 Database view,Help view,Maintenance views,projection views,

 Type group,

 Data Elements, global table type, Structured type,

 Domains,check table,fixed values,foreign keys,

 Elementary and collective search helps,

 Lock objects,

 Documentations ( data element,table),

 Table maintenance generator,cluster views generator,

Performance during database access:

 Secondary index,SQL performance,

 ABAP Open SQL and Native SQL,

 Using table and view buffering ,single,generic key and full buffering types,

 Get , put events ,Logical Database ,flexible selection screen

 SQL trace,code inspector, Runtime Analysis,

 Authorization checks,

Update Techniques, Data consistency ,Lock Mechanism :

 Update function modules,

 Asynchronous Update and Synchronous Update techniques,

 Call Function … in update task

 Lock objects,Enqeue and deqeue Functions,

 Foreign key table and check table,fixed values,

Internal tables :

 Standart table,Sorted table , hashed table

 Binary search,index search,key access search(hash algoritm),

 Dynamic Programming with Field Symbols and References,

Enhancement and Modifications :

 Append structure,Append view,Append search help,customizing includes,

 BADI’s implementation,

 Customer exits,User Exits,

 Personalization,transaction variants,guitxt,

Modularizations:

 Call Subroutine,

 Function Modules,

 Global and Local Classes,methods,super classes,sub classes, polymorphism,

 Include programs,

 Message Classes,

 BDC (Batch input Programming),

 BAPI programming,

 RFC (Remote Function Modules),

Classical screens (dynpros) and selection screens,Smartforms:

 Abap Events,

 Screen painter,menu painter,sub screen,modal screen,table control,

 Classical Report & interactive reports,

 Smartforms,

 Backround programming,job scheduling,

Alv Grid

 ALV Grid methods,

 Layout,fieldcatalog,classes,events,

Basis informations:

 Client copy,

 Transporting requests from development to test and production systems,

 Creating authority classes ,objects and fields with in sap_all profile or user spesific roles

 Updating user profiles ,

 Printer settings,

 Catching and debugging system dumbs,

 Performance analysis,

SD,MM,FI and PP Informations:

 Defining new plant,delivery point ,storage locations,

 Defining new sales office,

 Defining new material groups,

 Defining new output type with using NACE t-code,for instance;invoice,sales order,delivery order,

 Creating new sales condition table,condition types,

 Creating condition lists,(V/LD)

 Authority checks , abap codes with using userexits or customer exits for sap standart transactions,

 Authority checks , abap codes with using BADI for sap standart transactions,

 Enhancement standart collective search helps with using append elemantary search helps,

Computer Knowledge:

Languages : ABAP,Visual Basic.net ,Pascal ,C,Asp.Net,SQL query

Operating systems: Dos,Windows

Database: Ms sql,Access,My Sql

Other skills : Ms Office,